Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
INSTALL CUSTOMER'S CALIPER COVERS
OTIS B. gave our service a 5 star review on 5/31/2022
IDLER ARM – Remove & Replace – 4WD w/Skid Plate – [DOES NOT include alignment.]
INTERMEDIATE SHAFT – Remove & Replace – Gas Lower
PITMAN ARM – Remove & Replace – 2500 – [Includes: R&I Steering Gear Assembly.] – [DOES NOT include alignment.]
TIRE ROTATION
BALL JOINT – Remove & Replace – 2500,4WD Lower,Both – [DOES NOT include alignment.]
BALL JOINT – Remove & Replace – 2500,4WD Upper,Both – [Serviced with Control Arm.] – [DOES NOT include alignment.]
TIE ROD &/OR END – Remove & Replace – 2500,2 Door Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on som
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
JASON H. gave our service a 5 star review on 3/24/2022